Part # vlv08

2 Port, Load sense or Fixed Pump valve.

Can operate spinners and conveyor with spinner motors in series.

Will work on LS pumps or fixed pump drive. If tractor does not have Power Beyond then this is the valve to use. Simply connect the LS line if required or for fixed pump cap port no other plumbing necessary.

Part # vlv10

3 Port, Load sense or Fixed Pump valve.

Can operate one conveyor with spinner motors in parallel for headland control.

Will work on LS pumps or fixed pump drive. If tractor does not have Power Beyond then this is the valve to use. Simply connect the LS line if required or for fixed pump cap port no other plumbing necessary.

Part # vlv005

4 Port Load sense valve used to control twin conveyors and twin spinners on Transpread Patented systems. Gives full independent control of each, overruns for spinner fitted, and ports for temp. and pressure transducers. Used with 1020 computers.

Standard with 4 55lt. cartridges, can have 77 on conveyors this will need pump to suit

Part # vlv012

4 Port Load Sense  or Fixed Pump valve used to control twin conveyors and twin spinners on Transpread Patented systems used to control variable width. Gives full independent control of each, overruns for spinner fitted, and ports for temp. and pressure transducers. Used with 1020 computers.

Standard with 4 55lt. cartridges, can have 77 on conveyors this will need pump to suit. Simply connect the LS line if required or for fixed pump cap port no other plumbing necessary.

Part # vl010

4 Port Load sense valve. Used on single feed system spreaders to independently control each  spinner, and a single control for the conveyor and a blower control. Made to be used on Transpread  500 conveyor spreaders fitted with a blower. Over run checks fitted to the 2 spinner valves and also the blower. Can be used with either the Transpread 1020 computer or the older 2020 Transpread Computer.

Part # vlv300

Valve solenoid cover 

Part # vlv020

Spinner Flow control with overrun check valve, used as spinner control on trailers. Brand fc55.

Part # vlv022

Jockey lift valve for 2 line tractor connection to operate jockey wheel

Spinner headland valve to suit Eaton type porting, for controlling one spinner manually or electronically on trailer spreaders and connecting spinner bleed off and jockey ram extension.

Spinner headland valve to suit Danfos type porting, for controlling one spinner manually or electronically on trailer spreaders and connecting spinner bleed off and jockey ram extension. 

Part # vlv027

1/2 BSP Banjo Kit for connecting to BSP ported motors

Part # vlv026

7/8 JIC Banjo Kit for connecting to UN ported motors

Part # vlv028

Manual conveyor and spinner control. Can be used on a wide range of oil flows.

Part # vlv029

Electronic conveyor and spinner control. Can be used on a wide range of oil flows. Fitted with relief cartridge for independent pump.

Part # vlv016

Electronic conveyor and spinner control. Can be used on a wide range of oil flows. Fitted with relief cartridge for independent pump.

Has higher flow than vlv029

Part # co420

Manual control often used with a spinner control when controlling a spinners for headlands or if in series the spinner speed can be controlled from the tractor

Part # co426

Manual control often used with the valve above when controlling 2 spinners or spinner and conveyor on sand spreaders

A readout is given of the speed of each drive 

Older Type Valves

Part # vlv100

Fixed pump valve fitted with conveyor relief, system relief and dump

Part # vlv014

EPV load sense valve

Part vlv048

Used to control flow when wanting to use load sense valves with a fixed pump when there is no LS or Power Beyond connection. Not required on later type LS / Fixed Pump valves.